Showing posts with label window replacement. Show all posts
Showing posts with label window replacement. Show all posts

Monday, July 16, 2012

A Little Shade Can Go a Long Way


The hot days of summer are upon us. If you’re thinking of ways to reduce your summer energy bills, you might consider investing in a home improvement that will keep your home cool, stylish and comfortable: shade awnings.

According to the U.S. Department of Energy, window awnings can reduce solar heat gain in the summer by up to 65% on south-facing windows and 77% on west-facing windows. You can use awnings to shade individual windows, or you can order an awning custom-made to shade the entire side of your house. If you don’t want an awning all year around, you can order models that retract or roll up when you don’t need them.
 

Types of Awnings
A small, horizontal awning will completely shade a south-facing window during the summer. An east- or west-facing window needs an awning that extends down to cover a larger part of the window. Sideless awnings, called Venetian awnings, can be adjusted as the angle of the sun changes. Venetian awnings, however, are usually not effective at blocking direct sunlight on south-facing windows. Hood awnings are more effective because they come with sides that block out additional sun. Hip awnings project out and down to accommodate casement windows that open outward.


Fabric Choices
In the past, most awnings were made of metal or canvas, which need to be re-covered every five to seven years. Exposure to sun, wind and water wore them out over time. Today, awnings are made from synthetic fabrics, such as acrylic and polyvinyl laminates, that are water-repellent and treated to resist mildew and fading. No matter which fabric you choose, you should select one that is opaque and tightly woven. Also, opt for a light-colored awning that will reflect instead of absorb more sunlight.


Adequate Ventilation
Awnings require ventilation to keep hot air from becoming trapped around the window. Grommets or other openings along the tops and sides of an awning can provide ventilation. The awning may also open to the sides or top to vent hot air.


Almar Building & Remodeling Co is a third generation family owned and operate company for over 50 years. As a fulls ervice general constrution company, we have all the benefits of a small company with the options of a larger company including financing. We service the entire South Shore of Massachusetts including: Hanover, Hingham, Pembroke, Norwell, Scituate, Cohassett, Avon, Hanson, Abington, Rockland, Holbrook, Braintree, Weymouth, Milton, and many more towns.






Tuesday, June 12, 2012

Scituate Ma: Latest in Windows, Doors & Siding

By: Craig H. Guido, CS

As professional Remodelers it is so important that we take the time out of the office and job site to stay on top of the latest products and industry news. So our Production Manager Mark Caruso and I recently took a trip to the HarveyBuilding Products Trade Expo at Gillette Stadium to see what is new for 2012.

Annually Harvey’s holds the Northeast's largest building and remodeling trade shows designed for people in the building trade. Through demonstrations and vendor displays, these trade shows help build sales skills and productivity, informing you of the latest products and installation techniques in the marketplace today.

Mark and I came away with a lot of good information that will certainly help Almar and the clients that we work with. We got the latest updates on Harvey Windows & Sunrooms, Therma TruDoors, and many more products. But one new product really peaked our interest. Almar installs a lot of Certaineed Vinyl Siding, including their CedarImpressions. According to Certainteed’s website Cedar Impressions provides homeowners with “all the charm of cedar without the high cost and maintenance…”
But there is now a product available to those clients whose budgets might need an additional option as well. TheFoundry Vinyl Siding by the Tapco Group might be an option to consider. According to their website; “Its limited lifetime warranty and enhanced color protection mean your home’s charm can stand up to unrelenting sun, serious rainy seasons, frigid winters and blizzards...Foundry premium siding is crafted from hundreds of real cedar and stone molds, providing nature’s exact texture. The industry’s most comprehensive color palette elevates a full range of architectural styles, from Craftsman to Cape Cod and Victorian. Explore The Foundry to envision your dream exterior.”

Foundry siding offers options in: Shingles, Shakes, Stone, and Shapes.

            Shakes: Deep texture is the hallmark of Foundry Cedar Shake siding. With the look of hand-split cedar, its random grooves and grain demonstrate extraordinary authenticity.

            Shingles: Shingles from The Foundry showcase classic style. They provide naturally-textured surfaces and sophisticated detail.
 
            Stone Collection: Created with molds cast from real stone, Foundry Stone Collection Siding provides uncompromising detail and vibrant color that reflect the authentic, rugged qualities of hand-cut limestone.

            Shapes: Signifying attention to detail, Foundry shapes distinguish a home with exceptional dimension.

You can visit their website (http://www.foundrysiding.com/homeowners/virtual-remodelerH.aspx) for Virtual Remodel where you can upload a photo of your own home and see how new vinyl siding can enhance you homes curb appeal.
So when you are ready to review all of your options for installing new vinyl cedar shingle siding on your house give Almar Building a call. Our full service remodeling team can help you every step of the way thru any renovation project you are looking to tackle: Addition, Kitchen, Bathroom, Basement, Sunroom, Siding, Windows, Decking, and even roofing.

As a third generation family owned and operate company for over 50 years we have all the benefits of a small company with the options of a larger company including financing. We service the entire South Shore of Massachusetts including: Hanover, Hingham, Pembroke, Norwell, Scituate, Cohassett, Avon, Hanson, Abington, Rockland, Holbrook, Braintree, Weymouth, Milton, and many more towns.


Monday, April 02, 2012

Pembroke Windows: National Window Safety Week: Important Safety Tips to Protect Your Child.

April 1 – 7, 2012 has been deemed National Window Safety Week. Windows are great they provide ventilation, emergency escapes and natural light but windows can also pose a risk of a fall
in the home if safety measures are not followed.

Massachusetts Building Codes are designed to require that at least one window in each room is large enough to act as an escape route if necessary. In addition window manufactures now design replacement windows to open easily, and so that screens an be removed without any special tools or knowledge if you need to utilize it as an escape route.

According to the National Safety Council’s 2011 Media Kit National Safety Week is important because, “Windows are one of the few things we enjoy both inside and outside our homes and business. Windows serve an important role in our lives by letting in natural light and soothing fresh air as we open them and by keeping out the elements when they’re closed. Some windows ─ larger units called egress or emergency escape and rescue windows ─ can take on an even greater role if we need to escape quickly in the event of a fire or other emergency, or if rescue workers need to enter through them in emergency situations.”

The National Safety Council also recommends reviewing the following tips about window safety:

1. Doors serve as the primary exits. Windows provide a secondary means of escape from a
burning home or for other emergencies. Determine your family's emergency escape plan and practice it. Remember that children may have to rely on a window to escape in a fire. Help them learn to safely use a window under these circumstances.

2. When performing spring repairs, take care to make sure that your windows are not painted or nailed shut. You must be able to open them to escape in an emergency.

3. Keep your windows closed and locked when children are around. When opening windows
for ventilation, open windows that a child cannot reach, or in the case of a double-hung window, open the top sash only.

4. Set and enforce rules about keeping children's play away from windows or patio doors. Falling through an insect screen, open window or glass can be fatal or cause serious injury.

5. Keep furniture - or anything children can climb - away from windows. Children may
use such objects as a climbing aid.

6. If you have young children in your home and are considering installing window guards or window fall prevention devices, be aware that the window guards or devices you install must have a release mechanism so that they can be opened for escape in case of a fire or other emergency. Consult your local fire department or building code official to determine proper placement for window guards and window fall prevention devices.

7. Some homes may have window guards, security bars, grilles or grates already covering
their windows. Those windows are useless in an emergency if the devices on them do not have a functioning release mechanism. Time is critical when escaping a fire. Take time to update these devices to make sure they comply with industry standards and have appropriate release mechanisms.

8. Do not install window air conditioners in windows that may be needed for escape or
rescue in an emergency. The air conditioning unit could block or impede escape through the window. Always be sure that you have at least one window in each sleeping and living area that meets escape and rescue requirements.

9. The degree of injury sustained from a window fall can be affected by the surface on
which the victim falls. Shrubs and soft edging like wood chips or grass beneath windows may lessen the impact if a fall does occur.

***

About the Window Safety Task Force
The Window Safety Task Force of the National Safety Council was formed in 1997 to promote greater awareness of window safety. This group is composed of members representing the American Architectural Manufacturers Association (AAMA), the Window and Door Manufacturers Association (WDMA) and the Screen Manufacturers Association (SMA), in cooperation with the National Association of Home Builders (NAHB) and other organizations, as well as leading manufacturers of windows, doors and screens. More information can be
found at nsc.org/windowsafetytaskforce.

Almar Building & Remodeling Co, Hanover Massachusetts (781-826-2577) is proud to be a
member of NARI and is committed to uphold the standards that all NARI members
represent. Almar’s entire team is ready to work with homeowners from all over the south shore of Massachusetts like Hanover, Pembroke, Hingham, Norwell, Scituate, and Cohasset. As a full service Design/Build remodeler Almar can handle all phases of remodeling: Additions, Kitchens, Bathrooms, Basements, and Sunroom projects.
*Photo Courtesy of Harvey Building Products: Tribute Premium Double Hung Window

Tuesday, March 13, 2012

Hanover Contractor: Pella Pro Expo 2012


Craig and I love to have the opportunity to get out of the office and attend new educational programs. We know that we can only keep improving ourselves and Almar Building & Remodeling by paying attention to new products and best business practices. So we were delighted to be invited to the Invitation only Pella Pro Expo held at Gillette Stadium.

This Expo featured not only seminars and workshops on the latest ‘hot topics’ in the remodeling industry but also included many well know manufacturers. It was great opportunity to have one on one time with the manufacturer’s reps themselves to ask specific questions and learn about
new products and improvements to old products.

It was great to see all the Pella window and door products up close especially
their new 350 Series. As stated on the Pella Website:

Pella 350 Series windows offer an exclusive energy-saving system with triple-pane glass making them Pella’s most energy-efficient products. Advanced technology makes them stronger and more durable. Distinctive styling gives them a more beautiful look. Choose from three frame colors, two grille types and multiple hardware finishes and styles.

Maintenance-free vinyl frames
Stronger and more durable with 61% more vinyl
Dual-color frame option
Optional triple-pane glass for maximum energy efficiency
Fold-away crank won't get in the way

We were also lucky enough to attend two seminars presented by Patrick O’Toole from Professional Builder and Professional Remodeler on marketing and technology trends in remodeling. Craig and I are looking forward to sorting thru all our notes and putting new processes to work for all our remodeling clients very soon.

And don’t forget to give us a call (781-826-2577) at Almar Remodeling Co to organize all of your remolding projects. Almar is located in Hanover Ma, and serves many South Shore towns like: Hanover, Scituate, Norwell, Hingham, Cohasset, Duxbury and Pembroke for all of your Home Remodeling needs (Additions, Kitchen Renovations, Bath Remodels, Basement Finishing)

Tuesday, August 30, 2011

Ten Things to Know when Buying Replacement Windows

By Terry Quinn: CS, CAGR, CAPS, VSI

Not all windows are the same. Some met Energy Star requirements and some don’t. There are many things we could go over but here are ten things you should know when evaluating & choosing windows and a professional installer.

1. Most advertisements that you see in the paper or mailings that list a price also list a United Inch size.
a. A United Inch is a figure arrived at by adding the width and the height together….so a 30 inch wide and 57 inch window is 87 united inches.
b. Many advertisements that you see for windows as low as $159 etc…are for small windows with a low united inch number.

2. Many advertisements that you see with prices included in the ad do not include installed pricing.

3. Replacement windows are installed in the frame of the existing window.
a.If you want to install a window that is a larger or smaller size than existing we may recommend a new construction window.

4. Most replacement window installations do not require new interior or exterior trim to be installed.
a. The existing interior trim can be removed and reinstalled. This will require some touch up paint be done.

5. The most important part of a replacement window installation is the insulating around the new units frame and the old window frame.
a. If you have an older home where the old windows had a weight/pulley system this also include making sure the old weight pocket is stuffed with insulation before the new window is installed.

6. Most installations require removal of storm windows if they exist.
a. As long as you pick a quality replacement window (like the Excalibur) you won’t need the storm windows anyway because the new windows are much better insulated and energy efficient.

7. Grids can be order “between the glass”
a. There are many different Decorative Options available to you based on you and your homes personal style. They can add style and dimension to your windows.
b. You can choose from a Classic grids, Contoured Grids, or Gold Tone Brass Grid patterns.
c. There are also options available in replacement windows for V-Grooved Cut Glass where you can add a cut polished V-grooved glass pattern into your window for the perfect touch of elegance.

8. Most window replacement jobs require RRP Protection
a. If you house was built before 1978 and you do not have a lead report stating you house is free of lead paint you are required to work with an RRP licensed contractor by the EPA.

9. Tax Credits are still available.
a. Although less tax credit money is available now than in previous years when you purchase new products that meet energy efficiency guidelines you may be eligible to take advantage of these incentives.

10. Replacement windows can be designed for all styles: windows, bays and bows.
a. You can choose double-hung windows, sliding windows, casement windows, awning windows, garden windows, bay & bow windows, and even sliding patio doors.
b. Replacement windows come in vinyl, wood, steel and a combination of each.

We could go in to a lot of detail on each of these ten items plus many more, so please let us know if you have a specific question or would like more information about any of the topics mentioned above. Almar also offers Financing - so ask about details on low monthly payments.

Monday, July 11, 2011

RRP Law - Quick Reference Information

If you own property built before 1978, you must now hire a lead-safe contractor. Why? because unless you have a certificate that says your house has no lead in it any renovation or work must be done following the RRP Law.

Common renovation activities like sanding, cutting, and demolition can create hazardous lead dust and chips by disturbing lead-based paint, which can be harmful to adults and children.


Beginning April 22, 2010, contractors, plumbers, electricans, painters etc… performing renovation, repair and painting projects that disturb lead-based paint in homes, child care facilities, and schools built before 1978 must be certified and must follow specific work practices to prevent lead contamination.

EPA requires that firms performing renovation, repair, and painting projects that disturb lead-based paint in pre-1978 homes, child care facilities and schools be certified by EPA and that they use certified renovators who are trained by EPA-approved training providers to follow lead-safe work practices.

A Lead Safe Renovator Contractor may perform repair, renovation or painting work on your home or facility which may include “low risk” or “moderate risk” deleading.

The Lead Safe Renovator Contractor license is different from a general contractor’s license. In Mass the Division of Occupational Safety is in charge of the Mass RRP Lead Law. To verify a contractors Mass lead license click here. If they say they are insured make sure you call the agent and confirm that the premiums have been paid and the coverage is in effect for the stated date. We cannot afford to trust a pretty face or take someone's word anymore without also being prudent.

Homes and other structures built before 1978 may contain lead paint. If your contractor does not follow lead-safe work practices in carrying out work that disturbs lead paint, lead containing dust may be produced. Exposure to lead dust has been shown to be a significant health hazard for both children and adults.

In Massachusetts, enforcement of EPA's Renovation Repair and Painting Rule has been delegated to the Department of Labor Standards (DLS). DLS' Lead-Sate Renovation regulations (454 CMR 22.00) apply to anyone who is paid to do work that disturbs more than threshold quantities of paint in or on homes, schools or childcare facilities.

This group includes:
• Painters
• Renovation and remodeling contractors
• Electricians
• Plumbers
• Maintenance workers
• Landlords

To request a Renovate Right Pamphlete outlining important Lead Hazard information for families, child care providers and schools. Or for more information about how RRP might effect your home please call Craig a 781-826-2577