Pembroke, Ma: Garage Door Safety Tips

June is National Safety Month, so The International Door Association and the Door & Access Systems Manufacturers Association have designated June as Garage Door Safety Month. Your garage door is probably the single largest operating piece of machinery in the house and it is vital to your families safety, so you should make sure it is operating correctly.

The website GarageDoorSafety.com states that their mission is “To provide home owners with the most comprehensive residential garage door and opener safety risk assessment available.” This site helps homeowners identify potential dangers created by garage doors. You can also see injury statics such an estimated 7,557 Pinch/Crush Section injuries were reported in the United States in 2007. These injuries were defined as “Fingers caught between section joints, includes amputations, avulsions, etc.”

The Overhead Door Corporation is offering consumers 10 safety and security tips to ensure protection throughout the year.

·         Make sure the garage door opener control button is out of the reach of small children.

·         Do not let children play with garage door remote controls.

·         Never place fingers between door sections. Explain the dangers to children and consider pinch-resistant door panels.

·         Consult the owner's manual and learn how to use the garage door's emergency release feature.

·         Visually inspect the garage door each month. Look at springs, cables, rollers and pulleys for signs of wear. Do not attempt to remove, adjust or repair these parts or anything attached to them. These parts are under high tension, and should only be fixed by a trained door technician.
 

·         Test the garage door opener's reversing mechanism monthly by placing a 2x4 board or a roll of paper towels in the door's path. If the door does not reverse after contacting the object, call a qualified garage door professional for repair. If the opener has not been replaced since 1993, replace the garage door opener with a new one that has safety sensors and auto-reverse as a standard feature.

·         While on vacation, unplug the garage door opener unit or use a wall vacation lock console security switch, which renders remotes unusable and is an optional accessory to most openers.
 

·         Do not leave the garage door partially open. When activated again, it may travel downward and come in contact with an object in its path. This also compromises a home's security.

·         If the opener does not have rolling-code technology, be sure to change the manufacturer's standard access codes on the opener and remote control, or consider investing in a newer model with rolling-code technology which changes the access codes each time the opener is used.

·         Never leave the remote control in the car when given to a parking attendant. A stolen remote leaves you more susceptible to home invasion. Always lock your car when left unattended. It's a small inconvenience for safety and security.

Source: PR Newswire (http://s.tt/1dtU1)

So please be sure to consider these tips to protect your family. And if your unit is old and starting to fail please consider replacing it with a more energy efficient unit that will be more safe and secure.

Commentory on"CONSUMER ALERT: Contractor took the money, and apparently ran."

The Sunday Globe (Boston) two weeks ago had an article that made me stop and look twice. It was entitled CONSUMER ALERT: Contractor took the money, and apparently ran.

AT first glance you see that headline and what do you say to yourself? “Oh no, those poor people!” That’s what I say too, but then again these people could have prevented this form happening to themselves.

One of the very first things we do is to try and educate our potential client about the pitfalls of committing their time, home, and money to the wrong people. As anyone who had ever talked to us knows we spend a lot of time going thru the steps every homeowner should address with potential partners for their project. From getting current copies of licenses and insurance, to reading the contract and checking the state website for any current information that might be available.

In this Q & A article the homeowner says that they hired a “friend” of two co-works, gave him and $9,000 upfront to purchase the materials “to get a discount”, but after the project never got started and he stop returning their calls, then found out that he was not registered with the state, and wants to know what to do.

Unfortunately we hear this all the time, and we loose jobs to these guys when homeowners get sucked into the thought of getting the cheapest price possible. Well, that thinking just cost them an additional $9,000.00 this is the thing that gives us all a bad name, but until homeowners stop buying into it will never change. Whoever they hired gave them a low-ball price because he didn’t know his costs, and or never intended on doing the project because he isn’t a real contractor.

The Globe writer does a good job of going on to explain just what we always tell clients upfront. You can’t really do anything if you hired an unlicensed person. The state does have $10,000 available thru a state fund in the event of a loss to a contractor (which is funded by fees paid into by all registered and licensed contractors each year), but you must have hired a registered contractor or be eligible for access to the fund. As rightly so, since we are the ones funding the money.

The article goes on to quote Barbara Anthony, the undersecretary of the Massachusetts Office of Consumer Affairs and Business Regulation “Our mantra at the Office of Consumer Affairs and Business Regulations is to only deal with registered home-improvement contractors”

The article also did a good job of reminding homeowners that in Massachusetts a contractor cannot take more than a third of the project price upfront (unless there are special order items, and they can take enough to cover those costs). That’s one of the main reasons Almar clients have so many progress payments in our contract. You’re never too far ahead of us and we are never to far ahead of you.

The article didn’t address some other red flags that we always point out: Never let a contractor tell you to pull the permit. If they aren’t willing to do it, there is a reason, and if you pull the permit you will then become liable for them and their work.

Just remember a deal isn’t always the lowest price. The bottom line is almost never just about money. Who you are working with, where they come from, how long they’ve been in business, how professional they are, and their ability to be here for years to come often will save you way more money then by hiring the lowest price guy. There’s a reason he’s so much cheaper then people who know what they are doing.

And remember that for most people their house is their largest asset! Why hire the cheapest, unlicensed and unprofessional contractor to entrust that asset to? You wouldn’t put your money in an uninsured bank, or hire a lawyer who didn’t have a law degree, or a doctor without a medical license.

If you’d like more information and tips about how to protect yourself and save yourself thousands of dollars while planning your next remodeling project then request my FREE REPORT: The 6 "Secrets" to the Perfect Custom Remodel of Your Home.

The EPA requires remodelers to become certified to work in pre-1978 homes

Protect your family from lead
The EPA requires remodelers to become certified to work in pre-1978 homes

Hanover, Ma March 12, 2010—The Almar Building & remodeling Co is making homeowners aware of the U.S. Environmental Protection Agency (EPA) regulations that will take effect April 22, 2010, requiring remodelers working in homes built before 1978 to follow practices designed to minimize the exposure of residents to lead hazards.

“Lead is harmful to both children and adults. In children, a tiny amount of exposure can lead to neurological damage, and in adults, lead inhalation can lead to hypertension, muscle and joint pain, fatigue and nausea among other symptoms,” says Craig Guido.

The EPA is calling for all remodelers who intend to work in pre-1978 homes to register their company and complete an 8-hour training and certification course with an accredited trainer. The course teaches remodelers how to safely contain lead in a home as it is being disturbed and reduce exposure to residents and workers.

Almar wants homeowners to know how to protect themselves from harmful lead exposure during renovations. If you know your home was built before 1978 and your renovation will disturb painted surfaces you will have to hire an EPA Certified Firm.

Guido adds that current law requires that renovators give homeowners an EPA brochure called “Renovate Right,” which includes facts about lead and lead safety in the home and have it signed to signal that homeowners have been properly notified of the dangers.

If owners of a pre-1978 home decide to remodel, it is important to assume lead is present unless testing is done to identify exactly where the lead is by using a lead test. The following three main areas of safe work practices recognized by the EPA can be used to help homeowners start the lead conversation:

· Containing the work are so that dust and debris does not escape, complete with warning signs, heavy-duty plastic and tape.
· Minimizing the dust by using methods such as misting water on areas before sanding or scraping.
· Clean up thoroughly on a daily basis using special cleaning methods such as using a HEPA vacuum and wet mopping with plenty of rinse water.

As a certified firm, Company can prove the certification by displaying our training certificate to homeowners and on the jobsite.

The EPA also recommends that homeowners have the remodelers specify what the final lead inspection entails. If a homeowner has any doubts about the quality of lead safe practices being conducted in their homes, call 1-800-424-LEAD.

Almar Building & Remodeling is a full service Remodeling Company which has been serving the South Shore since 1959. Almar delivers not only a guarantee and warranty with all of work, but also promises quality work to homeowners. Almar’s office is located at 1130 Washington St on Rt. 53 in Hanover. For more information please call 781-826-2577 email Almar@AlmarBuilding.com or visit the Almar website at www.AlmarBuilding.com